HAMMER LUG UNIONS

ANSON Hammer Lug Unions are available in all Fig. Numbers as Butt Weld Unions

A full range of API Line Pipe Threaded Unions are available from Fig. 50 through to Fig. 1502.

ANSON Hammer Lug Unions are available in Hydrogen Sulphide trim (Sour Gas H2S) with either Threaded or Butt Weld ends.

The Anson suction and low pressure Figure 50 is manufactured from steel, available Threaded or Socket Weld and in 4 inch or 5 inch sizes.

A low pressure general purpose threaded union suitable for air, water, oil or gas service.

A general purpose, all steel constructed union designed to meet a variety of applications up to and including service at 2,000 pounds per square inch.

The Figure 206 is the Figure 200 with a secondary seal to supplement the metal-to-metal ball and cone seat.

Figure 207 Blanking Caps and unions are fully interchangeable with Figure 200 and 206 unions. For use to blank off the end of a line.

The Figure 600 is designed to easily perform at 6,000 psi (414 bar).

The Figure 602 is designed for pressures up to 6,000 pounds per square inch (414 bar).

The Figure 1002 union is a high pressure, low alloy steel union fitted with a replaceable elastomer seal ring.

All Fig.1003 Unions are misaligned types and will allow for a misalignment of up to 7.1/2° off the center line, 15° included.

The 5 and 6 inch Fig. 1002 Unions utilize elastomer 'O' rings for sealing purposes available in Standard Service or Sour Gas trim.

The Figure 1502 Union is probably the most widely used end connection of the hammer union family, handling 15,000 psi cwp.

ANSON Figure 2002 Unions are made from the finest steel, selected to give the ultimate in performance.

The Figure 2202 Sour Gas Union is ruggedly proportioned and manufactured to the highest quality standards to ensure safety and reliability in service.

Anson Hammer Lug Union Chart

ANSON Lip and 'O' Ring type Seals are available for standard service in Nitrile and Fluroelastomer for use in Sour Gas Service.

ANSON can manufacture specials to suit your specific requirements for materials, dimensions and types.